Many people have fears about owning a gas furnace, but they actually are quite safe as long as owners keep up with the proper maintenance and check for problems every now and again. The biggest fear most people have about gas furnaces is leaking. It is fairly easy to check to see if your gas furnace is leaking. All you have to do is put one teaspoon of dish liquid in one cup of water. Paint this solution on your gas supply pipeline with a paint brush, and don’t forget to paint the valves and connections. If there is a leak, you will see bubbles appear where the leak is. Then you simply have to contact the experts at Jennings Heating & Cooling Co., Inc. to take care of the gas furnace repair.
Should You Do Your Own Gas Furnace Repair?
Most of the problems that arise with gas furnaces should be repaired by a professional. If you live in Ohio you can call Jennings Heating & Cooling Co., Inc. to do the work for you. Of course, there may be small problems that can easily be fixed by you, and you will be able to save money on repair bills. Here are some troubleshooting tips to help you decide whether or not you need to call someone in for your gas furnace repair:
- No Heat – Check to see if the unit is getting electricity. It could be that the problem is simply a burned out fuse that needs to be replaced or a circuit is broken.
- Not Enough Heat – Your burner may be clogged with dirt, which is easy to clean yourself. While you are cleaning you should also make sure the air burner shutter is properly adjusted.
- Pilot Light is Out – It is probably dirty, and you can clean it with a toothpick. If the flame is not at the right height you can adjust it to where it should be.
- Thermocouple Doesn’t Work – You can’t fix this. It will have to be replaced, which is easy to do.
- Burner Takes too Long to Light – There is probably a dirt clog blocking the pilot orifice. Simply set a higher level for the pilot light and clean out the dirt.
- Flame is too Yellow or Uneven – You need to clean the burner to correct this.
- Air in the Home is too Dry – Clean and wash the evaporator pad (replacing if necessary) if you have a humidifier in the home. You may also have to adjust the float to bring the water level up.
The Bigger Picture
If you have done your troubleshooting and you are still having problems you will need to call in the experts from Jennings Heating & Cooling Co., Inc. for your gas furnace repair. Unless you are a trained heating and cooling technician it is never a good idea to try to do any big repairs yourself. To learn more about the services offered by Jennings you can visit the website at www.jenningsheating.com.